Strips and sheets

AO "Severstl Distribtion" (SMC Cherepovets) realizes slitting and cutting to sheets coils.

To order produced in SMC Cherepovets material, you can get in touch with AO "Severstal Distribution" managers from Cherepovets region or from other regions.


Steel coils slitting

Produced material - HR pick., CR, HDG, El.tech., CDG and pre-painted steel.

Characteristics

Values

Mechanical properties of the material - a tensile strength, Rm, max, Y / mm²

490

*The possibility of cutting rolled without annealing with a tensile strength of 780 N / mm², thickness up to 1.0 mm

Mechanical properties of the material - yield strength, Reh, Y / mm²

215-255

Min and max thickness for slitting, mm

0,3-3,2

Min strip width after slitting, mm

50

Width tolerance for thicknesses till 2.0 mm

±0,1

Width tolerance for thicknesses up to 2.0 mm

±0,3


By ordering sizes, which not included in table, possibility of manufacturing must be checked with SMC technicians.

 

Sheet and blank production after cut crossing

Produced material - HR pick., CR, HDG, El.tech., CDG and pre-painted steel.

Characteristics

Values

Mechanical properties of the material - a tensile strength, Rm, max, Y / mm²

490

Mechanical properties of the material - yield strength, Reh, Y / mm²

215-255

Min and max thickness for cross cutting, mm

0,3−3,0

Min width, mm

400

Min sheet length after cutting (mm) at thickness till 1.5mm

400

Max sheet length after cutting (mm) at thickness till 1.5mm

6000

Min sheet length tolerance after cutting (mm) at thickness till 1.5 mm

1

Min difference of the diagonals of the sheet (mm) at thickness till 1.5 mm

1

Min difference of the diagonals of the sheet (mm) at thickness of 1.5 to 3.0 mm

650

Max sheet length after cross cutting (mm) at thicknesses from 1.5 to 3.0 mm

3200

Min sheet length tolerance after cutting (mm) at thicknesses from 1.5 to 3.0 mm

2

Min difference of the diagonals of the sheet (mm) at thickness from 1.5 to 3.0 mm

2


By ordering sizes, which not included in table, possibility of manufacturing must be checked with SMC technicians.